992免费影院 在线观看,无码国产精成人午夜视频一区二区 ,人妻 丝袜 另类 久久,少妇久久高潮喷水18禁

PRZ6000型全自動石油產品熱值測定儀

一、概述： 適用于測量電力、煤炭、冶金、石化、質檢、環保、水泥、造紙、地勘、科研院等行業部門測量煤炭、焦炭、石油、水泥生料，磚坯及其它固體或液體等可燃物的發熱量，符合國標GB/T213-2008《煤的發熱量測定方法》、GB/T384-1988《石油產品熱值測定法》的要求。

PRZ6000型全自動石油產品熱值測定儀

二、特點:
1、采用微機實現測量過程的自動控制和計算，系統采用Windows XP操作系統，操作全過程漢字提示，人機交互，即學即用，按提示操作即可完成試驗。在測試的同時可進行數據處理、數據查詢、數據修改等其它工作，功能*，使用方便。
2 、高度自動化，自動點火、自動注、排水，自動稱水重、調水溫、只需裝好氧彈，儀器便可完成全部測試工作。
3、電腦控制自動標定儀器熱容量，輸入相關數據，微機自動換算被測物質的高低位發熱量,自動存盤并打印結果。
4、采用串口通信技術，故障率低，自動保護，自動診斷，使用環境寬松。測量精度高分析快，精密測溫探頭，實時顯示溫度-時間曲線，方便直觀。 
5、低故障率，自保護、自診斷技術、故障查找快捷、便于維護。
6、簡便易用，界面友好，軟件容錯性好，易學易用。
7. 結果準確，采用*的冷卻校正體系，保證儀器性能的測試穩定性。
8、6000型微機全自動量熱儀作為單筒量熱儀系統使用，若對兩臺熱量計進行異步控制，請選用6000B微機全自動(雙控)量熱儀系統。

PRZ6000型全自動石油產品熱值測定儀

三、技術指標及參數:
1、使用環境：5-40℃
2、熱容量：約10500J/K
3、分辨率：0.0001℃ 
4、測量精度:符合GB/T 213－2008要求
5、測試時間：15min左右
6、外水筒容量 30L 
7、內水筒容量 約2.3L 
8、點火電壓 24V 
9、點火時間 6分鐘點火
10、定量誤差：≤±1g
11、測量誤差：國標
12、主機功耗：≤40W　                        　
13、電源電壓：AC220V±10％50Hz      

PRZ6000 type automatic determination instrument of calorific value of petroleum products
One, overview: suitable for measurement of electric power, coal, metallurgical industry, petrochemical, quality inspection, environmental protection, cement, paper, geological exploration, scientific research institute and other departments to measure the coal, coke, petroleum, cement raw material, heat quantity of brick and other solid or liquid combustible, meet the national standard GB /T213-2008 "determination of calorific value of coal" GB/T384-1988 "method, determination of calorific value of petroleum products" requirements.
Two, characteristics:
Automatic control and calculation of 1, using microcomputer measurement process, the system adopts Windows XP operating system, the operation of the whole process of Chinese characters hint, human-computer interaction, learning namely, according to the prompts to complete the test. In the test and can make data processing, data query, data modification and other work, superior function, easy to use.
2, a high degree of automation, automatic ignition, automatic filling, automatic drainage, water weight, water temperature regulation, only need to place the oxygen bomb, the instrument can perform all of the testing work.
Automatic equipment calibration of heat capacity 3, computer control, input data, microcomputer automatic conversion of measured material of high calorific, automatically save and print the results.
4, by using serial port communication technology, low failure rate, automatic protection, automatic diagnosis, using relaxed environment. High measuring accuracy analysis of fast, precise temperature measuring probe, real-time display of temperature time curve, convenient and intuitive.
5, low failure rate, self protection, self diagnosis technology, fault finding fast, easy maintenance.
6, easy to use, friendly interface, software fault tolerance, easy to use.
The 7 result is accurate, the unique cooling correction system, ensure the stability of performance testing instrument.
8, 6000 type microcomputer automatic calorimeter as a single barrel calorimeter system to use, if the counting of asynchronous control for two sets of heat, please use the 6000B microcomputer automatic (dual control) calorimeter system.
Three, the technical indexes and parameters:
1, the use of the environment: 5-40 C
2, the heat capacity: about 10500J/K
3, resolution: 0.0001 C
4, the measuring accuracy conforms to the GB/T 2132008 requirements:
5, the test time: About 15min
6, the water barrel capacity 30L
7, the water cylinder capacity of about 2.3L
8, the ignition voltage 24V
9, the ignition time of 6 minutes of ignition
10, quantitative error: less than 1G
11, the measurement error: better than the national standard
12, the host power consumption: less than 40W
13, the power supply voltage: AC220V + 10%50Hz